For laying indoors and outdoors. Able to bear certain traction during installation, but not external mechanical forces. Laying single core cable in magnetic ducts is not allowed.

XLPE Insulation PVC Sheath Cable Standards

International: IEC 60502-1, IEC 60228,

China: GB/T 12706, (GB/T 18380-3 for ZR-YJV only)

Other standards such as BS,DIN and ICEA upon request

Technical data

Rated voltage:0.6/1kV

Maximum Conductor Temperature: under normal (90^OC), emergency (130^OC) or short circuit no more than 5 s (250℃) conditions.

Min. Ambient Temp. 0^OC, after installation and only when cable is in a fixed position

Min. Bending Radius: 20 x cable O.D for single core

15 x cable O.D for multi core

Physical and Electrical Characteristics

No.cores x	Insulation		Sheath	Outer Ø	weight	Current ratings in air 30℃	Current ratings buried 20℃
cross-sec.	thickness		thickness	approx.	approx.
			Nominal
	Phase	Neutral	value
mm²	mm	mm	mm	mm	kg / km	A	A
3×4+1×2.5	0.7	0.7	1.8	12.7	277	37	47
3×6+1×4	0.7	0.7	1.8	13.9	363	47	60
3×10+1×6	0.7	0.7	1.8	16.1	527	64	81
3×16+1×10	0.7	0.7	1.8	18.6	766	85	106
3×25+1×16	0.9	0.7	1.8	22.2	1140	113	137
3×35+1×16	0.9	0.7	1.8	24.6	1475	139	164

Application

Used as a distribution and transmission line with a rated voltage of 0.6/1kV.
Suitable for burying in the ground, laying wells and underwater. Able to withstand certain shaft tension.

International standards: IEC 60502-1, IEC 60228;
Requirements of other standards such as ASTM BS, DIN and ICEA

Inquiry Cart 0