Four cores (four cores with equal cross-sectional area or three cores with equal cross-sectional area and one neutral core with smaller cross-sectional area),

Five cores (five cores of equal area or three cores of equal cross section and two neutral cores of smaller cross section).

6. Standard: IEC 60502.IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST, etc. Or other special features according to customer requirements.

Physical and Electrical Characteristics

No.cores x	Insulation		Sheath	Outer Ø	weight	Current ratings in air 30℃	Current ratings buried 20℃
cross-sec.	thickness		thickness	approx.	approx.
			Nominal
	Phase	Neutral	value
mm²	mm	mm	mm	mm	kg / km	A	A
3×4+1×2.5	0.7	0.7	1.8	12.7	277	37	47
3×6+1×4	0.7	0.7	1.8	13.9	363	47	60
3×10+1×6	0.7	0.7	1.8	16.1	527	64	81
3×16+1×10	0.7	0.7	1.8	18.6	766	85	106
3×25+1×16	0.9	0.7	1.8	22.2	1140	113	137
3×35+1×16	0.9	0.7	1.8	24.6	1475	139	164

Characteristics of xlpe power cable

1. The maximum insulation temperature is the long-term working temperature of PVC insulated cable is 70°C, and XLPE is 90°C

2. The installation temperature of the cable should not be lower than 0°C

3. The maximum temperature of short circuit: PVC does not exceed 160°C, XLPE 250°C, does not exceed 5 seconds

4. Cable with allowable bending radius: not less than 10 D times (D: outer diameter of the cable) 5.

Perfect chemical stability, acid, alkali, grease and organic solvent resistance, and flame retardant.

5. Structural parameters of XLPE insulated power cable with rated voltage 0.6/1KV

Inquiry Cart 0