Dc Solar PV Cable Any Color Double Insulated 4mm For Solar Panels

Industrial Solar Panel 600V - 1000V PV Wire Electron Beam Cross Linked Polyolefin Insulation

Photovoltaic copper conductors are suitable for outdoor rooftop applications without conduit and for use in conduits and raceways installed underground in wet locations, and where condensation and moisture accumulations within the conduit do not exceed 90°C. Applications requiring direct burial is permitted with PV wire. All cables comply with TUV’s VW-1 (Vertical Wire) Flame Test. Insulation compounds are rated for flame and sunlight-resistance.

Application

Especially for the connection between Solar power generation device connector and connection of inverter, Under the condition of different climate outdoor installation, and can adapt to the dry and wet indoor working environment

Construction

1. Conductor: fine wire strands of tinned copper wires, according IEC60228, class 5

2. Insulation: halogen free PE, electron beam cross-linked

Colors: black

3. Outer jacket: halogen free and flame retardant PE, electron beam cross-linked resistance against water, UV resistant

Jacket color: black, red

4. Max, temperature at conductors: -40℃ up to +120℃

5.Temperature ranges: -40℃ up to +90℃ (min.25 years)

6. Nominal voltage U0/U: AC 1000V, DC 1500V

7. Mat. DC voltage: 1800V (conductor-conductor, non-earthed system, circuit not under load)

8. AC-test-voltage: 6.5KV

9. Minimum surface resistance of sheath: 109Ώ

10. Other tests: according EN 50618

Advantage:
With high resistance against heat, cold, ozone, UV, oil, microorganism, abrasion, acid & alkaline; Flame free, flexible, easy to strip, extremely mechanical robust, long lifespan etc